Rebel Legion http://newsite.rebellegion.com Costuming. Community. Charity. Thu, 25 Apr 2019 12:04:43 +0000 en-US hourly 1 https://wordpress.org/?v=5.1.1 EL DORADO BASE http://newsite.rebellegion.com/el-dorado-base/ Thu, 18 Apr 2019 12:43:05 +0000 http://newsite.rebellegion.com/?p=658265 Serving Colombia Commanding Officer (CO): :ColombiaOCO: Executive Officer (XO): :ColombiaOXO: Continue reading ]]> Serving Colombia

Commanding Officer (CO): ricop777 (Pablo Rico)

Executive Officer (XO): Lucsa (Luigi Carlo Caterina)

EXTERNAL LINKS




  • ]]>
    Ileenium Outpost http://newsite.rebellegion.com/ileenium-outpost/ Thu, 09 Aug 2018 13:39:40 +0000 http://newsite.rebellegion.com/?p=658164 Serving Korea  Commanding Officer (CO): :KoreaOCO: Executive Officer (XO): :KoreaOXO: Continue reading ]]> Serving Korea 

    Commanding Officer (CO): :KoreaOCO:
    Executive Officer (XO): :KoreaOXO:

     

    EXTERNAL LINKS

     




  • ]]>
    Kukulcan Outpost http://newsite.rebellegion.com/kukulcan-outpost/ Fri, 27 Jul 2018 12:56:55 +0000 http://newsite.rebellegion.com/?p=658150 Serving the Yucatan peninsula. Commanding Officer (CO): :KukulanCO: Executive Officer (XO): :KukulanOXO: Continue reading ]]> Serving the Yucatan peninsula.

    Commanding Officer (CO): raulvader (Raul B. A.)
    Executive Officer (XO): Hec thor kenobi (hector sarmiento)

     

    Request Our Appearance

    EXTERNAL LINKS

     

     




  • ]]>
    Ahsoka Tano (Winter) http://newsite.rebellegion.com/ahsoka-tano-winter/ Wed, 23 May 2018 11:52:34 +0000 http://newsite.rebellegion.com/?p=658123 Continue reading ]]>

     

    CHARACTER DESCRIPTION

    Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. (Source: Wookieepedia)


    REQUIRED ITEMS

    1. Headpiece:

    Togruta montral off-white with blue (with grey tint) bands. Must match reference pictures.

    2. Skin:

    Orange (even paint) with accurate markings in the face. Must match reference pictures.

    3. Dress:

    Colours are maroon or dark red, the material can be suede, micro-suede hunting calf, moleskin or similar. Dress is visible at neckline of the coat.

    4. Gloves:

    Fingerless gloves that reach under the bracers. The gloves can be a slightly different color than dress and bracers, but must be a close match.

    5. Boots:

    Boots and Chaps are the same colour and material as the bracers. The chaps reach to the kneecap and are closed with five (5) golden buckles on the outside of the leg. The buckles have the same design as the ones on the bracers. Light weathering is recommended but not a must.

    6. Trousers:

    Dark grey leggings with six (6) diamond shaped cut outs, five (5) smaller with one (1) larger at the top.

    7. Accessories:

    – Necklace / choker: a thin golden ring with a golden diamond.

    – Six (6) small and one (1) large triangular, pewter pieces of jewellery on the head framing the face.

    – Pewter ceremonial chain on the montrals. (See reference pictures).

    8. Coat:

    Color and Material:

    The coat is a warm toned grey in color. The fabric of the coat should have a texture similar to suede, or micro-suede.

    Requirements:

    The coat must have a center front seam running all the way down the center of the coat but must not have a center back seam.

    Belt and Armbands:

    The Belt and armband details should be the same material as the coat but in a lighter grey color, they should have dimension that matches references to make them ‘puff out’ from the body of the coat.

    Fur:

    Fur of the coat should be white, fur should have texture either with styling or additional tufts fur should not hang flat. Fur should continue to be the same width on the underside of the coat hem matching references. At the bottom of the coat in the front the fur should have a break in it. The fur should follow the side seams of the coat. The fur should curve at the corners of the coat from the bottom to the side it should not be a sharp corner.

    Pattern:

    The body of the coat and the sleeves should have a pattern that matches the references in a lighter grey similar to the color of the armbands and belt. The pattern is not present on the hood of the coat, the pattern can be painted, silk screened, or printed onto the coat, the pattern should match references.

    Hood:

    Hood should be made to properly fit the headpiece, hood should have a fur edging and a defined break at the front of the hood matching references. The hood should have a white tuft on each top point of the hood and aligns with the tips of the montrals of the headpiece. There should not be any visible center seams coming down the back of the hood. The back of the hood should come to a point that ends at the bottom of the belt, the coat should have a fur tuft in white that comes out of the bottom of the hood.


    COSTUME RESOURCES

    1. KJO picture gallery

    Standard written by Author: GigglingGothGirl
    Standard reviewed by the Costume Standards Committee 23 May 2018


    PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here)




  • ]]>
    Signals Intelligence Technician (Rogue One) http://newsite.rebellegion.com/signals-intelligence-technician-rogue-one/ Wed, 23 May 2018 11:40:12 +0000 http://newsite.rebellegion.com/?p=658116 Continue reading ]]>

     

    CHARACTER DESCRIPTION

    Signals Intelligence Technicians were technicians who served in the early rebel movement on Yavin, prior to the battle on Scarif.


    REQUIRED ITEMS

    1. Shirt:

    – Long sleeved tan, khaki, beige or coyote colored shirt with a collar ending in two points.

    – Front has a rectangular bib with seams on the bottom and both sides. The bottom seam of the bib is two to three inches above the belt line.

    – Double rows of stitching (flat-felled or similar) in each seam is recommended.

    – Optional back yoke.

    – Worn tucked into the pants.

    – The sleeves of the shirt do not have cuffs.

    2. Trousers:

    BDU-style pants in chocolate brown or khaki with cargo pocket on each outer thigh. Pants may have accurate padding sewn in to knees. Pant legs are worn inside the boots.

    3. Belt:

    Tan/Khaki/Coyote brown colored web belt with roll-pin buckle. A British PLCE roll pin belt, which is worn inside out, is the most accurate belt. The belt contains 5 (five) vertical loops for mini-flares on both sides. The mini-flares are made of metal or other materials that, when finished, have a metallic silver appearance.

    4. Boots:

    Chelsea-style boots in brown or black leather. No visible laces.

    5. Anklet-style cuff:

    An anklet style cuff. The cuff should have the same color as the boots. The right cuff has two silver colors cylinders. The cylinders can be made of metal, wood or plastic.


    OPTIONAL ITEMS

    1. Accurate headset.

    COSTUME RESOURCES

    1. RAID forum

    Standard reviewed by the Costume Standards Committee 23 May 2018
    Author:


    PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here)




  • ]]>
    Jocasta Nu (Star Wars comic) http://newsite.rebellegion.com/jocasta-nu-star-wars-comic/ Mon, 07 May 2018 13:04:37 +0000 http://newsite.rebellegion.com/?p=658099 Continue reading ]]>

     

    CHARACTER DESCRIPTION

    Jocasta Nu was a female Human who served as the Chief Librarian of the Jedi Archives during the final days of the Galactic Republic, with a penchant for being a bit overconfident in the completeness of her Archives.   During her career, Nu served as a member of the Jedi High Council and trained many Padawans, including the future Emperor’s Hand, Jerec, Olee Starstone, whom she tutored in the years prior to the Clone Wars, and Jin-Lo Rayce, founder of the Agents of Ossus.   Jocasta Nu died when the 501st Legion ransacked the Jedi Temple at the end of the Clone Wars. Source: Wookieepedia


    REQUIRED ITEMS:

    1. Hair:

    Hair in high bun at the back of the head with two white hairsticks forming an X. Grey or white hair recommended.

    2. Tunic:

    Tunic is a greyish blue in colour, with wide Sleeves that reach to the elbow (or under the arm wraps).

    The tunic is approx knee length and has 4 slits (back and front of the thighs) up to the belt.

    3. Cape:

    The cape has no sleeves, is charcoal blue or black on the outside and lined with a greyish blue fabric. The cape has a wide hood that is closed in the front. the cape reaches to the middle of chest and back. There is a train fixed under the hood that ends below the knees on the back.

    4. Belt:

    Grey leather or leather like belt with a silver rectangular buckle (Jedi style).

    5. Pouches:

    One (1) grey leather or leather like rectangular pouch (upright format – right side). One (1) grey leather or leather like rectangular pouch (landscape format – left side) that has nearly the same height like the belt.

    6. Trousers:

    Trousers are wide and the same colour like the tunic.

    7. Wraps:

    The wraps on arms and legs are off white to light grey and tight.

    The arm wraps start below the elbow and cover the dorsum of the hand.

    The leg wraps start under the knee and cover the ankle.

    8. Boots:

    The boots are little bit higher than ankle height and in a medium grey. On the sides of the boots (inner and outer side) there are slits.


    OPTIONAL ITEMS:

    1. Lightsaber:

    Silver coloured lightsaber hilt. (No toy sabers, no Ultimate FX short saber). The lightsaber may be a static prop (hilt-only). Attached blade(s), LED lights, and sound effects, are allowed but not required. If bladed must be blue.

    2. Sniper Blaster:

    Long Sniper rifle with a saturated brown hue. The end of the riffle has a lighter stock with a wood frame that has detailing in the center.

    There is a blue chamber towards the front of the riffle.

    The butt of the riffle has red lines and etched detailing.

    The center has a loading chamber that is tan and wrapped. There is a Jedi symbol just above it in a circle.


    COSTUME RESOURCES

    Jedi forum


    Standard reviewed by the Costume Standards Committee: 7 May 2018


    PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements.  The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists.  If you have a question about fabrics, colors, and parts choices for your build please contact the LCJs for your category about parts/materials you are considering before you start your build. (LCJ listing here)




  • ]]>
    Yavin Operations Trooper (Rogue One) http://newsite.rebellegion.com/yavin-operations-trooper-rogue-one/ Fri, 04 May 2018 09:02:41 +0000 http://newsite.rebellegion.com/?p=658092 Continue reading ]]>

     

    CHARACTER DESCRIPTION

    Yavin Operations Troopers were troopers who served in the early rebel movement on Yavin, prior to the battle on Scarif.


    REQUIRED ITEMS

    1. Jacket:

    -Grey-blue, brown, or olive heavy canvas jacket.

    -Sleeves have blood stripe detail (printed, suede, embroidered, or similar) from shoulder to cuff. Darker brown, grey-blue, and olive jackets have tan stripes, and lighter brown jackets have darker brown stripes.

    -Jacket has a mandarin collar with 6 lines of topstitching on the collar.

    -The waistband also has 6 lines of topstitching.

    -There are left and right breast pockets, with a flap on the left-hand pocket only. Pocket should have no visible securing snaps or buttons.

    -Screen-accurate top stitching and pockets on the front and action pleat on the back of the shoulders.

    -Screen-accurate compad inset above the left breast pocket.

    Optional: Contrasting front yoke.

    2. Trousers:

    -Khaki, Coyote or brown colored utility trousers with Cargo-style pockets along the outside of each leg, with top flap, and no visible closure buttons or snaps.

    -Pant ankles should be worn tucked into boots/boot toppers.

    Optional: Pants may have accurate padding sewn in to knees.

    3. Shirt:

    -Long sleeved, tan, beige, coyote or middle brown shirt with a collar ending in two points.

    -Front has a rectangular bib with seams on the bottom and both sides. The bottom seam of the bib is two to three inches above the belt line.

    -Double rows of stitching (flat-felled or similar) in each seam is recommended. -Optional back yoke.

    -Worn tucked into the pants.

    4. Belt:

    PLCE belt in tan or olive. Belt closure should be roll pin-style or silver buckle with accurate greeblie.

    Optional: silver screen-accurate energy pellets tucked into the loops on the belt.

    5. Boots:

    -Chelsea-style boot in brown or black leather (can be suede).

    -No visible laces.

    -Anklet-style cuff that matches boot color.


    OPTIONAL ITEMS

    1. Optional (where permitted by law):

    DH-17 (Rogue One Version)

    A-300 in sniper configuration only.

    This costume varies from the Scarif Marine standard but has a lot of shared parts.


    COSTUME RESOURCES

    1. RAID forum

    Standard reviewed by the Costume Standards Committee 4 May 2018
    Author:


    PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here)




  • ]]>
    Mon Mothma (Rogue One) http://newsite.rebellegion.com/mon-mothma-rogue-one/ Tue, 24 Apr 2018 09:00:44 +0000 http://newsite.rebellegion.com/?p=658078 Continue reading ]]>

     

    CHARACTER DESCRIPTION

    Mon Mothma was a human female politician and revolutionary leader who served in the Galactic Senate and Imperial Senate as the representative of Chandrila, the leader of the Alliance to Restore the Republic, and the first Chancellor of the New Republic. (Source: Wookieepedia)


    REQUIRED ITEMS

    1. Hair:

    -Short bobbed hair, styled to match screen references.

    -Reddish color preferred.

    2. Jewellery:

    – A necklace consisting of two silver chains and a round, silver pendant, detailed as it appears in the movie, suspended in the center from three thin cords twisted together; one a thin silver roped cord, one cream or ivory, and one white.

    -One screen accurate, oval shoulder brooch with crossed cord accents worn on the left shoulder.

    -One screen accurate, rounded triangle shoulder brooch with 3 lines of cord accents worn on the right shoulder.

    3. Outer poncho:

    -Off-White, may have a grey undertone, crinkle crepe-like fabric.

    -Front and back pieces pleated along the shoulder to match screen references.

    -Seam along the top of the arm from neck to wrist.

    -Boatneck neckline.

    -A large tuck at either elbow along the seam.

    -Poncho falls to knee or just above knee height.

    Optional: Lined in a plain weave (Like charmeuse) of the same color.

    4. Under dress:

    -Chocolate brown woven fabric, textured finish- crinkle preferred.

    -Ankle length dress with a full skirt.

    -Sleeves reach wrist, visible under outer poncho.

    5. Shoes/Boots:

    -Brown, flat soled.

    -No visible buckles, zippers, straps, or buttons.


    COSTUME RESOURCES

    1. Rebel Commanders forum

    Standard reviewed by the Costume Standards Committee: 24 April 2018
    Author: RebelLady (Kristina Gundersen)


    PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here)




  • ]]>
    Yavin Operations Officer (Rogue One) http://newsite.rebellegion.com/yavin-operations-officer-rogue-one/ Wed, 18 Apr 2018 14:02:50 +0000 http://newsite.rebellegion.com/?p=658064 Continue reading ]]>

     

    CHARACTER DESCRIPTION

    Rebel officers, also known as Alliance officers were officers who served in the early rebel movement and later would serve as military officers of the Alliance to Restore the Republic during the lead up to and during the Galactic Civil War. (Source: Wookieepedia)


    REQUIRED ITEMS

    1. Jacket:

    -Grey-blue, brown, or olive heavy canvas jacket.

    -Sleeves have blood stripe detail (printed, suede, embroidered, or similar) from shoulder to cuff. Darker brown, grey-blue, and olive jackets have tan stripes, and lighter brown jackets have darker brown stripes.

    -Jacket has a mandarin collar with 6 lines of topstitching on the collar.

    -The waistband also has 6 lines of topstitching.

    -There are left and right breast pockets, with a flap on the left-hand pocket only. Pocket should have no visible securing snaps or buttons.

    -Screen-accurate top stitching and pockets on the front and action pleat on the back of the shoulders.

    -Screen-accurate compad inset above the left breast pocket.

    Optional: Contrasting front yoke.

    2. Trousers:

    -Khaki or brown colored utility trousers.

    -Pant ankles should be worn tucked into boots/boot toppers.

    Optional: Cargo-style pockets along the outside of each leg, with top flap, and no visible closure buttons or snaps. Pants may have accurate padding sewn in to knees, or elastic cuffs at the ankles, but not both.

    3. Shirt:

    -Long sleeved, tan, beige or middle brown shirt with a collar ending in two points.

    -Front has a rectangular bib with seams on the bottom and both sides which (recommended) continue down to bottom of hem.

    -Double rows of stitching (flat-felled or similar) in each seam is recommended.

    -Optional back yoke.

    -Worn tucked into the pants.

    4. Belt:

    Option 1:

    PLCE belt in tan or olive. Belt closure should be roll pin-style or silver buckle with accurate greeblie. Optional: silver screen-accurate energy pellets tucked into the loops on the belt.

    Option 2:

    Brown belt with octagonal silver buckle consistent with the RFT belts.

    5. Boots:

    Option 1:

    -Dark brown leather (or leather-like) lace-up combat boots with two matching flaps covering the laces.

    -Bottom flap of boot has screen-accurate buckle. The buckle’s bail (wire piece) is attached with a loop of leather sewn into the flap. The box parts of the buckle are black and the wire parts are silver.

    -No visible zippers, but discrete inside zippers are permitted.

    (Screen used boots are Frye Sutton Tall or Veronica boots)

    Option 2:

    -Chelsea-style boot in brown or black leather (can be suede).

    -No visible laces.

    -Anklet-style cuff that matches boot color.

    6. Rank badge:

    Screen accurate rebel rank badge worn on the right side of jacket, just above breast pocket. Badge should reflect rank of the costumer’s choice below Colonel.


    OPTIONAL ITEMS

    1. Era-appropriate Alliance used sidearm and holster such as:

    -A180 Pistol

    -BlasTech DH-17

    -BlasTech DL-44


    COSTUME RESOURCES

    1. Rebel Commanders forum

    Standard reviewed by the Costume Standards Committee 18 April 2018
    Author: RebelLady (Kristina Gundersen)


    PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here)




  • ]]>
    General Leia Organa (Raddus Bridge, TLJ) http://newsite.rebellegion.com/general-leia-organa-raddus-bridge-tlj/ Wed, 11 Apr 2018 13:43:30 +0000 http://newsite.rebellegion.com/?p=658045 Continue reading ]]>

    CHARACTER DESCRIPTION
    Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order. The daughter of Jedi Knight Anakin Skywalker and Senator Padmé Amidala of Naboo, Leia was the younger twin sister of Luke Skywalker, and, shortly after her birth, she became the adopted daughter of Bail Organa and Queen Breha of Alderaan, making her a Princess of Alderaan.  An accomplished Senator, Leia Organa was most famous for her strong leadership during the Galactic Civil War and other subsequent galactic conflicts, making her one of the galaxy’s greatest heroes. (Source Wookieepedia)


    REQUIRED ITEMS:

    1. Outer Coat:

    a. The coat should be made of a very dark grey fabric with a metallic silver sheen. The fabric weave or pattern should give the impression of a neat square design.

    b. The fabric must be rigid enough that the collar and sleeves stand stiff when worn. The collar and front sections of the coat should be lined with the exterior fabric.

    c. The coat features a shoulder seam, mid back seam, side seams, and back horizontal collar seam. There is no collar seam on the front portions of the coat.

    d. The coat has a standing collar that hits just under the hairline in back and no more than 1 inch from the bottom of the chin in front.

    e. The end of the coat sleeves should angle up from the body, starting 3-4 inches / 7.5-10 cm past the fingertips close to the torso and ending about half way between the wrist and proximal knuckle. The sleeve is folded kimono style and is attached from just under the armpit in front, up over the shoulder and to the lower shoulder blade. The sleeves can be self-lined or lined with black fabric.

    f. The coat length should reach or be no higher than 0.5 inches / 1.5 cm off of the floor.

    2. Under Dress:

    a. A light charcoal grey under dress.

    b. The dress is long sleeved and has no top-stitching around the bottom hem, belt band, sleeves or neckline.

    c. The dress features a front center seam.

    d. The dress features a split neckline, the top of the neckline starts at the clavicle and the split extends down approximately 4 inches / 10 cm.

    e. The dress is gathered at the front at empire waistline level.

    f. There is a front band 1.5-2 inches / 3.5-5 cm wide at empire waistline level starting under one side breast and extending across the front of the dress and ending at the opposite side breast.

    g. The sleeves of the dress end at wrist level and the bottom hem of the dress ends approximately 2 inches / 5 cm from the floor.

    3. Hair:

    a. The front of the hair is styled swept back in front with a twisted band across the top of the head.

    b. There is a bouffant style hair bump at the crown of the head approximately 3 inches / 7.5 cm in height.

    c. The front twisted band is hidden on the sides by sections of hair above the ears – these sections are pinned under the bouffant hair in the back of the head.

    d. There are two low loose buns pinned to the bottom of the hairline covering the back of the head horizontally. The buns start vertically at the half-way point of the ear and ending at the half-way point of the neck.

    e. Naturally-occurring hair color only (brown with a touch of grey recommended); no bangs. If a wig or extensions are used, they must be of high quality and appear like real hair.

    4. Shoes:

    a. Black closed-toe boots with dark soles.

    5. Jewellery:

    a. Screen accurate gold or bronze ear cuffs that curl around the lower ear lobe and extend up the back of the ear.

    b. A screen accurate gold or bronze wrist cuff approximately 3 inches / 7.5 cm wide worn on the right wrist consisting of a thin wired effect. The wrist cuff feature a gradual wave pattern.

    c. A screen accurate gold or bronze ring with two circular blue stones worn on the right ring finger.

    d. A screen accurate gold or bronze blue-teal tone oval ring worn on the left ring finger. (Mainly blue with flecks of other colors recommended).


    OPTIONAL ITEMS:

    1) A screen accurate tracking device worn on the left wrist, colored to match visual references and held with a ¼ inch / 0.5 cm black chord.

    2) Natural make-up: matte red-brown lipstick, light blush, light brown eye-shadow, and mascara.


    COSTUME RESOURCES

    1. Senatorial Detachment forum

    2. Rebel Legion Senatorial Detachment photo gallery

    Standard reviewed by the Costume Standards Committee: 11 April 2018

    PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here)




  • ]]>