Troopers
Signals Intelligence Technician (Rogue One)
Signals Intelligence Technicians were technicians who served in the early rebel movement on Yavin, prior to the battle on Scarif.
read moreYavin Operations Trooper (Rogue One)
CHARACTER DESCRIPTION Yavin Operations Troopers were troopers who served in the early rebel movement on Yavin, prior to the battle on Scarif. REQUIRED ITEMS 1. Jacket: -Grey-blue, brown, or olive heavy canvas jacket. -Sleeves have blood stripe detail (printed, suede, embroidered, or similar) from shoulder to cuff. Darker brown, grey-blue, and olive jackets have tan stripes, and lighter brown jackets have darker brown stripes. -Jacket has a mandarin collar with 6 lines of topstitching on the collar. -The waistband also has 6 lines of topstitching. -There are left and right breast pockets, with a flap on the left-hand pocket only. Pocket should have no visible securing snaps or buttons. -Screen-accurate top stitching and pockets on the front and action pleat on the back of the shoulders. -Screen-accurate compad inset above the left breast pocket. Optional: Contrasting front yoke. 2. Trousers: -Khaki, Coyote or brown colored utility trousers with Cargo-style pockets along the outside of each leg, with top flap, and no visible closure buttons or snaps. -Pant ankles should be worn tucked into boots/boot toppers. Optional: Pants may have accurate padding sewn in to knees. 3. Shirt: -Long sleeved, tan, beige, coyote or middle brown shirt with a collar ending in two points. -Front has a rectangular bib with seams on the bottom and both sides. The bottom seam of the bib is two to three inches above the belt line. -Double rows of stitching (flat-felled or similar) in each seam is recommended. -Optional back yoke. -Worn tucked into the pants. 4. Belt: PLCE belt in tan or olive. Belt closure should be roll pin-style or silver buckle with accurate greeblie. Optional: silver screen-accurate energy pellets tucked into the loops on the belt. 5. Boots: -Chelsea-style boot in brown or black leather (can be suede). -No visible laces. -Anklet-style cuff that matches boot color. OPTIONAL ITEMS 1. Optional (where permitted by law): DH-17 (Rogue One Version) A-300 in sniper configuration only. This costume varies from the Scarif Marine standard but has a lot of shared parts. COSTUME RESOURCES RAID forum Standard reviewed by the Costume Standards Committee 4 May 2018 Author: PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...
read moreResistance Trooper (TFA)
Resistance Troopers also known as the Resistance infantry and Resistance soldiers, were well-trained and equipped soldiers of the Resistance approximately thirty years after the Battle of Endor
read moreRebel Ground Crew
Rebel Ground Crew supported the Rebels at the Battle of Yavin by loading droids into the sockets and were hands on for preflight prep and checks
read moreRose Tico
CHARACTER DESCRIPTION Rose Tico was a female human who served in the Resistance as a maintenance worker during their conflict with the First Order, whom Tico had hated since she was a child. Tico’s sister, Paige, was a gunner in the Resistance. (Source: Wookieepedia) REQUIRED ITEMS 1. Jumpsuit: Color: The jumpsuit is a dijon mustard color with heavy weathering. All visible stitching is two shades lighter than the jumpsuit fabric. *Stitching color is recommended. Hood: There is a hood attached to the collar of the jumpsuit and has a center panel. Seams: There are vertical front seams on the suit starting at the bottom middle of the front yoke on each side and extending down to the bottom of the pants. The sleeves have seams on the front and back that line up with the front and back yoke seams. Zipper: The suit has a front zipper that goes from 3”-4” below the yoke to the crotch of the pants and is hidden by a placket. There is a closure (snap, hook, etc) at the bottom of the yoke. Pants: The pants are bloused over the top of the boots, hiding the top of the boots. Waistband: There is a waistband that is covered by the belt. Pockets: There are 2 pockets: one chest pocket on the left side under the rank badge and one on the left leg around mid thigh. Pockets should be proportional to the costumer. Both pockets stand out on the jumpsuit. The chest pocket is square and roughly the same size as the patch that is on the opposite side of the jumpsuit. The pocket has a flap with a grey webbing tab and there is top stitching around the edges of the flap. There are 5 vertical lines of stitching on the center on the pocket. The thigh pocket is a rectangle, it is the same width as the chest pocket. There is a window in the thigh pocket for the com pad. The flap has a grey webbing tab and there are 14 lines of top stitching, 7 lines on the left side, 6 lines on the right side and one line in the middle of the flap. *Top stitching on the pockets is recommended but not required. Aurebesh: There is a square patch on the right side of the jumpsuit that reads “GLD Landing Officer” in Aurebesh lettering. “GLD” is in 1” type on one line, with “Landing Officer” on the second line in ½” type. 2. Greeblies: Rank Badge: There is a rank badge on the jumpsuit above the chest pocket sewn into a small fabric pocket. The left side of the pocket is not sewn to the jumpsuit which allows the badge to be removed. The badge is silver with a round button on the right hand side that is mustard yellow. There are 3 raised rectangular pieces in the upper left hand corner, 2 small silver buttons under the right 2 rectangles, and a raised cylinder in the right hand side. Hose Connectors: There are 4 barbed hose connectors on the right shoulder of the jumpsuit. They are 2” long and held on with 1” tan webbing. The same type of connectors are also on the belt. Com Pad: There is a com pad in the thigh pocket....
read more
Rebel Vanguard (Battlefront game 2004)
The Rebel Vanguard features in the Star Wars Battlefront game in 2004
read moreRebel Vanguard (Star Wars Commander: mobile game)
The Rebel Vanguard features in the Star Wars Commander mobile game in 2014.
read moreRebel Vanguard (Hasbro action figure)
The Rebel Vanguard is a figure made by Hasbro in 2007, from the Expanded Universe: Star Wars: Battlefront.
read moreRebel Fleet Trooper (Rogue One)
Rebel troopers, also known as Rebel fleet troopers or Rebel soldiers, were the front-line soldiers of the Rebel Alliance in their war against the Galactic Empire
read more
