Jedi

Rey (Training Outfit)

  CHARACTER DESCRIPTION Rey was a human female scavenger who discovered her latent Force-sensitivity while on a quest to find the legendary Jedi Master Luke Skywalker and bring a new hope to a galaxy on the brink of war. Source Wookieepedia REQUIRED ITEMS 1. Shirt: The shirt should be made from a natural cream-colored jersey knit or other stretch fabric with a V-neck formed by one side of the shirt wrapping over the other. a. The wrap should be right side over left side. b. Fabric should be thick enough or layered/lined such that there’s no visible wrap line under the top layer. c. The shirt should end at the wearer’s hips. The bottom of the shirt is unfinished/unhemmed. d. The shirt has a collar the shirt attached with visible stitching. e. Back detail: an arch detail goes across the shoulder blades on the back of the shirt. It stretches the entire length of the back of the shirt from armpit to armpit. The topmost part of the curve is approximately 3 inch (7.6 cm) from the base of the collar. This detail can be achieved through a seam or interfaced under layer. f.OPTIONAL but RECOMMENDED:The edges of the neckline, collar, and underarms are finished with a blanket-stitch or whip-stitch detail. 2. Pants: The pants should be made from medium to heavyweight fabric. Twill or suede-cloth is preferred.Color is in the range of olive/taupe/tan. a. The pants are fitted and the full length comes to just below the knee. b. The pants should have a side slit at the outside of the knee that goes about half way up the knee pad, approximately 4 inches. c. The knee pads are quilted with five oval sections. (OPTIONAL but RECOMMENDED:The knee pads are weathered). d. A horizontal seam goes around the upper leg, approximately 1 inch above the top of the knee pad. (OPTIONAL but RECOMMENDED: the seam is finished with decorative whipstitching). e. No visible pockets. 3. Arm Wraps: The wraps should be made of a textured fabric in a cream/off-white color. Stretch fabric recommended for mobility. a. Arm wraps must be weathered, particularly on the edges. b. Arm wraps start at the upper arm (mid bicep) and wrap all the way to the wrist. c. The end of the wrap should be tucked in to keep the wraps secure. d. A leather bracer may NOT be worn with this costume. 4. Hair: Hair should be done in Rey’s typical “three knob” hairstyle. The knobs should be three small, neat loops starting high on the back of the head and evenly spaced to the bottom. a. A few loose tendrils hang from the face on both sides. b. No loose bangs are permitted. Any bangs should be pulled back into a small ponytail and secured in the top “knob”. c. All natural hair colors accepted. Brown preferred. d. (OPTIONAL) Strips of wool or similar fabric in the same color as the wearer’s hair are tied around the base of each knob. 5. Boots: Dark brown wool or wool-like fabric and cork/leather/leather-like details. a. The soles are medium to light brown sole (slightly lighter than the main boot). b. The boot ends just above the ankle. c. The heel of the boot is cork (preferred), leather, or leather-like in a slightly...

Quinlan Vos (Clone Wars)

Quinlan Vos was a male Kiffar Jedi Master who lived during the final days of the Galactic Republic.

Jedi Librarian/Archivist/Historian

Jedi librarians, also called Jedi scholars, were members of the Jedi Order who had chosen to pursue the teachings of the Consular, specializing as a Lore Keeper

Rey (TLJ Battle Outfit)

Rey was a human female scavenger who discovered her latent Force-sensitivity while on a quest to find the legendary Jedi Master Luke Skywalker and bring a new hope to a galaxy on the brink of war.

Kyle Katarn (Star Wars Tales)

  CHARACTER DESCRIPTION Kyle Katarn was a famous Human male Rebel operative from Sulon and later a Jedi of the New Jedi Order. He was a former Imperial stormtrooper who defected to the Rebellion. (Source: Wookieepedia) REQUIRED ITEMS 1. Outer Tunic: White/off-White, long sleeved thermal style shirt with vertical ribbing, horizontal seam across the chest, and U or V shaped collar. Black patches under armpits. 2. Inner Tunic: Gray/White shirt-style Tunic or bib that fills the collar gap. No tee shirts or tank tops. 3. Armour: Three-sectioned brown shoulder pad fitted to right shoulder, can be removable or permanent. Should be made from leather/suede, or leather/suede-like material. Soft athletic padding is acceptable if the sectional design matches, and it is painted to resemble the appearance in the comic. Not required if jacket is worn. 4. Gloves: Short black driving-style gloves with holes along the tops of the fingers and open space on back of the palm, with snap closure near wrist. WITH Black leather or leather-like forearm bracer. Snaps or Velcro closure, no laces. (Bracers not required if jacket is worn). OR Long, black pilot-style gloves that extend to cover the forearms. Gloves should be made of leather or leather-like material. 5. Trousers: Black pants with cargo-style pockets on the outside of both legs, two back pockets. 6. Belt: Leather or military web style, black. Large silver buckle with two silver rectangles on the left and right side of a circle. Pouches: At least 4 small pouches (two in front, two in back). Saber Clip: D-clip hook, should be fitted to left side of belt, near the hip. 7. Holster: Brown leather drop-down holster attached to right hip, extending down to the thigh. 8. Boots: Black leather Jedi-style boots, mid-calf, but not above the knee. 9. Lightsaber: Longsword-style two-handed saber hilt. The lightsaber may be a static prop (hilt-only). Attached blade(s), LED lights, and sound effects, are allowed but not required. If bladed, blade is blue. (No toy sabers, no Ultimate FX short saber). 10. Hair/face: Short brown/black hair, trimmed beard. OPTIONAL ITEMS 1. Cloak: Brown flight jacket, waist-length. Stand-up collar with small lapels, horizontal pocket slits near bottom of the jacket. Horizontal seam across the chest, and across the shoulder blades in back. Vertical seam up the center of the spine, ends when intersecting with shoulder seams. May be made from leather, cotton, or canvas material. If made of leather, must be weathered and faded, if cotton or canvas, must be waxed to have slight gloss. 2. Blaster: Bryar Blaster Pistol. COSTUME RESOURCES KJO Detachment forum Standard reviewed by the Costume Standards Committee 22 March 2018 Author: Merc_with_a_Bryar (Sam Falco) PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Princess Leia (Jedi Leia, comic #12)

Leia Organa Solo (born Leia Amidala Skywalker) was, at various stages of her life, a politician, revolutionary, and Jedi Knight of the New Jedi Order.

Ezra Bridger (Season 3)

Ezra Bridger was a human male Jedi Padawan who, as an orphan on the Outer Rim planet of Lothal, became a rebel fighter and revolutionary leader in the early rebellion against the Galactic Empire.

Obi Wan Kenobi (Clone Wars Series 3-6)

Obi-Wan Kenobi was born in 57 BBY, the first son of a moderately wealthy family, and was taken to Coruscant to begin his Jedi training shortly thereafter.

SWTOR Humble Hero style Jedi Robes

The Jedi Order is the ancient peacekeeping organization of those sensitive to the Force, mainly the light side, dedicated to protecting the Galactic Republic. Its philosophies and objectives are considered the direct opposite to that of the Sith Order.

Luke Skywalker (Jedi-Bendu) from Dark Horse Comics

CHARACTER DESCRIPTION Luke Skywalker was a Force-sensitive human male Jedi Master who was instrumental in defeating the Galactic Empire and the Sith during the Galactic Civil War. (Source: Wookieepedia) REQUIRED ITEMS: 1. Tunic: Cream-colored tunic: – functional bib opening in front, visible silver buttons – brown line on bib opening – brown collar – brown cloak: brown cloak attaching ob the shoulders and 3/4 length (just above the boots at the longest) and Bell shaped on the bottom. The brown cloak is attached at the collar of the shirt. The two are basically one piece. 2. Pants: Cream-colored pants with brown line on sides. 3. Shirt: V shape brown shirt. 4. Balaclava: Brown Jedi-Bendu balaclava with proper shape. Bendu balaclava should be leather. 5. Bet: Brown leather belt with gun holster. All silver parts needs to be included (belt buckle, lightsaber holder, holster buckle). Brown leather belt in the same style Luke’s ESB belt with appropriate holster for the blasters. 6. Boots: Brown leather knee high boots without any zippers. 7. Gloves: Brown leather gloves. 8. Weapons: The Star Wars style vintage lightsaber and blaster. 9. Hair: White colored beard and hair OPTIONAL ITEMS: 1. Blue contact lenses. COSTUME RESOURCES Jedi Detachment forum Auhor: Blair(Vlastimil Sprta) Standard reviewed and agreed by the Costume Standards Committee: 7 June 2017 PLEASE NOTE: The costume standards are a guide, yet are not an all inclusive outline of required elements. The judges will be looking for quality of workmanship, accurate execution and use of materials in addition to these general standards check lists. If you have a question about fabrics, colours, and parts choices for your build please contact the Detachment Officer for your category about parts/materials you are considering before you start your build, or post a ‘Work in Progress’ (WIP) thread on the forum. (LCJ listing here) Report Content Issue: * Blank Page Invalid Contents Broken Links Other Your Name: * Details: * Submit...

Star Forge Revan robes (KOTOR)

CHARACTER DESCRIPTION The Star Forge robes were special Jedi robes that were made in an ancient massive automated Rakata shipyard, the Star Forge. These robes were long, colored sand-brown, and only its chestplate, gloves, and boots broke the ascetic simplicity. (Source Wookieepedia) REQUIRED ITEMS: 1. Robe/tunic: a. Ankle length tunic of a cream/off-white colour with a visible weave. b. Straight skirt, which may be gathered at the waist for additional fullness. If waist seam is present, it should be hidden beneath the chestpiece. c. Long, moderately loose sleeves. d. No visible closures. 2. Mantle & hood: a. Same material as tunic. b. Forms a loose, high collar around the neck. c. Covers shoulders to just above armpit level. d. Folds/gathers over the shoulders shoulders and blouses over top of chest armour and straps. e. When folded down, hood should lie across the shoulders and come to a point at roughly mid-back length. f. Mantle and hood may be one combined piece or two separate garment pieces. g. No obvious closures. 3. Chestpiece: a. Leather or leather-like medium brown vest chestpiece, in varying shades of medium brown. b. Vest should have accurate geometric ‘patchwork’ seams. Main portion of vest should be a tube-top shape, extending from waist/hips to armpit height. c. Square bib-like portion of vest in the center front of the vest, made of several layers of leather or leather-like material, extending over the top of the main chest piece. Bib portion has one vertical silver metallic claps on each side and connects to shoulder straps will silver O-rings. Straps should be roughly 1″-1.5″ (2.5-4 cm) wide. d. No visible closures. 4. Belt: a. Belt made of layers of leather or leather-like material in various shades of medium brown. b. The center front of the belt is two coincentric circles roughly 2.5″ and 3″ (6.5 and 8 cm) in diameter, connecting to a 3″ (8cm) wide belt by narrow strips of leather/leather-like material. c. The wider belt portion has made of decorative layers and has two silver metallic slide buckles decorating each side of the side-front. d. Belt goes underneath chestpiece at the back. It is only visible at the front and sides of the chestpiece. e. No visible closures. 5. Bracers: a. Fitted leather or leather-like bracers in medium-brown color extending from wrist to just below elbow. b. The top of the arm should be a slightly brighter/lighter brown than the under-arm section of the bracers. c. Bracers may have decorative etched lines on the over-arm section of the bracer near the wrists. d. Trapezoidal hand guards made of leather or leather-like material matching the bracers. They should cover the cover the glove from wrist to knuckles and attach without visible hardware. 6. Gloves: a. Plain black or dark brown gloves. Skin should not be visible. 7. Boots: a. Medium brown boots reaching above the ankles. b. No laces, buckles, or straps permitted. If zippers are present, they should be subtle and on the inside of the leg. c. Low-heeled 1 – 1 1/2 inches maximum. Spike heels are not permitted. 8. Lightsaber: a. No toy lightsabers are permitted (or Ultimate FX short saber). b. The lightsaber may be a static prop (hilt only). Attached blade, LED lights and sound effects are allowed, but not required. c. Metal...

Aayla Secura (Mechanic)

Aayla Secura was a female Twi’lek Jedi Master who served as a Jedi General during the Clone Wars

Kanan Jarrus (Season 3)

Kanan Jarrus was a Force-sensitive human male Jedi Knight who survived Order 66

Ezra Bridger (Season 1)

Ezra Bridger was a human male Jedi Padawan

Shado Vao

Shado Vao was a male Rutian Twi’lek Jedi Master

Xiaan Amersu (Aayla Secura Comic)

Xiaan Amersu was a female Rutian Twi’lek Jedi Knight

Luke Skywalker (TFA)

Luke Skywalker was a Force-sensitive human male Jedi Master

Petro (Jedi Youngling TCW)

Petro was a Human male Jedi Youngling who served the Jedi Order during the Clone Wars.

Ahsoka Tano (Star Wars Rebels)

CHARACTER DESCRIPTION

Ahsoka Tano, nicknamed Snips by her master, was a Togruta female from the planet Shili who trained as a Jedi apprentice during the Clone Wars, the conflict between the Galactic Republic and the Confederacy of Independent Systems. Tano was assigned to Jedi Knight Anakin Skywalker by Jedi Grand Master Yoda, and she demonstrated an eagerness to prove herself worthy to be his apprentice.

Rey (Resistance Outfit)

Rey was a human female scavenger who discovered her latent Force-sensitivity